JJHVAA KINGrinder K6 Spring Relief Replacement Part Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The JJHVAA Spring Relief Replacement is a third-party spare part, not a grinder: a small 3D-printed spring buffer made to fit inside the KINGrinder K6 manual grinder. Our take: it is only worth buying if your K6's own spring support is worn or lost and KINGrinder's original part is hard to get, and at about $23 it is not a cheap spare. JJHVAA says the part is 3D printed and may show some surface texture, and that it has no tie to KINGrinder. The listing does not give the material, the exact position in the grinder or fitting steps. We read the listing; we have not fitted the part.
What stands out
- Made to fit the KINGrinder K6
- 3D-printed spring buffer
- Black finish
- Third-party, not a KINGrinder part
Who it fits
Good fit for
KINGrinder K6 owners whose internal spring support is damaged or missing and who are comfortable opening the grinder.
Who should skip it
Owners of other KINGrinder models or other brands, and anyone whose K6 grinds normally.
Verdict: A niche repair part for one grinder; check that your problem is this part before ordering.
JJHVAA spring relief part details
Fits: KINGrinder K6 manual grinder
No other models are named, so assume K6 only.
Part: spring buffer, model GG0924
Sits with the grinder's internal spring; the listing does not show where.
Made by: 3D printing
Expect visible print lines; strength depends on the unlisted material.
Status: third-party part
Not made or endorsed by KINGrinder, so it may affect any warranty claim.
A printed spare
The part comes in black and is printed rather than molded, which the seller says can leave a slight surface texture. Its listed size of 1 x 1 x 1 in is a placeholder figure, not a real measurement. No material, such as PLA, PETG or nylon, is stated.
Fitting and use
You will need to take the K6 apart to reach the spring area, so follow KINGrinder's own disassembly guide and note the order of washers and springs as they come out. Fit the buffer in place of the worn one, reassemble, and recheck your zero point before grinding again. JJHVAA gives no fitting instructions of its own.
Should K6 owners buy it?
Buy it only once you know the spring buffer is the part that failed. Ask KINGrinder first, since an original spare would match the factory material and fit.
Check before you buy
- Do you own a KINGrinder K6 specifically?
- Is the spring buffer what is damaged?
- Can you take the grinder apart safely?
- Have you asked KINGrinder for an original part?
The product at a glance
JJHVAA Spring Buffer for KINGrinder K6
Best for: KINGrinder K6 repairs
- Power Source
- Manual
- Dimensions
- 1 × 1 × 1 inches
View on Amazon: JJHVAA Spring Buffer for KINGrinder K6 Affiliate link
JJHVAA GG0924 spring relief buffer in black, 3D printed, made to fit the KINGrinder K6 manual grinder. Third-party part; material and fitting steps not listed.
Pros
- Made for the K6
- Low-cost repair route
Cons
- 3D-printed finish
- Material not stated
- Costly for its size
Good fit if
- Your K6 spring buffer is worn or lost
Skip if
- Your grinder works normally
Verdict: A narrow repair part for KINGrinder K6 owners.
Specifications side by side
| Spec | JJHVAA Spring Buffer for KINGrinder K6 |
|---|---|
| Power Source | Manual |
| Dimensions | 1 × 1 × 1 inches |
| Color | Black |
| Model | GG0924 |
Frequently asked questions
Does the JJHVAA part fit the KINGrinder K6?
Yes, it is sold as compatible with the K6.
Is the JJHVAA spring relief an official KINGrinder part?
No, it is a third-party part, not affiliated with KINGrinder.
What is the JJHVAA part made of?
The listing says it is 3D printed but does not name the material.
Does the JJHVAA part come with instructions?
None are mentioned in the listing.
See also
- rattleware 25101 espresso knock box review
- yolococa silicone espresso tamping mat review
- matow 53mm coffee distributor review
- best coffee grinders under 30
- best coffee grinders under 100
- 8 Best Coffee Grinders Under $150, Compared
- Best Coffee Grinders Under $200 in 2026: 12 Picks Ranked by Specs
- Best Coffee Grinders Under $300: 12 Spec-Based Picks
- dayette original h14 replacement filter compatible dayette air
- best OutIn coffee machines
