OXO Brew 1.1-Quart Gooseneck Electric Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This oxo brew pour over gooseneck review focuses on the OXO Brew 1.1-Quart Gooseneck Electric Kettle. It is a stainless steel electric kettle designed for precision brewing. The two defining specs are its temperature control range and its gooseneck spout. You can heat water in one-degree increments from 104 F to 212 F. The elongated spout provides a steady, controlled pour. These features support consistent extraction for pour-over coffee. The unit holds the target temperature for up to 30 minutes. It also includes a built-in timer to track heating time. This kettle lifts freely from its base for easy handling.
What stands out
- Temperature control in 1° increments from 104 F to 212 F
- 1.1-quart capacity with a stainless steel build
- Gooseneck spout for steady, accurate pouring
- Keep warm function lasts up to 30 minutes
- Integrated brew timer for consistent preparation
Who it fits
Good fit for
This kettle suits pour-over enthusiasts who need precise water temperatures. The fine temperature control allows you to adjust for different bean roasts. The gooseneck spout helps you manage flow rate for even saturation. The 1.1-quart size fits most standard coffee drippers. The keep warm feature is useful if you brew slowly or make multiple cups. The cool-touch handle and balanced design make it safe and easy to handle during daily use.
Who should skip it
You should look at another option if you need a larger volume. The 1.1-quart capacity may be too small for households making multiple large batches. If you prefer manual control without digital features, this electric model may feel restrictive. The fixed temperature range stops at 212 F, so you cannot exceed boiling. Those who want variable power levels or rapid boil-only functions might find the incremental heating too slow for their routine.
Verdict: The OXO Brew 1.1-Quart Gooseneck Electric Kettle offers precise temperature control and a steady pour for consistent coffee extraction. Its specs make it a solid choice for dedicated pour-over brewers who value accuracy.
Key specs explained
Temperature Control: 104 F to 212 F, 1° increments
You can adjust water heat in single-degree steps. This precision helps you match specific coffee bean profiles, from light roasts needing higher heat to darker roasts requiring cooler water. The one-degree resolution allows fine-tuning that standard kettles lack. You get consistent results by avoiding guesswork. This level of control is essential for pour over brewing where small temperature changes affect extraction and flavor clarity.
Keep Warm Duration: 30 minutes
The kettle maintains your set temperature for half an hour. This feature supports multi-cup sessions or slow brewing routines without reheating. You avoid waiting for water to cool down or boil again. The automatic shut-off after this period adds safety. This duration is practical for home users who need steady heat for several minutes of continuous pouring or for preparing multiple cups sequentially.
Capacity: 1.1 Quarts
This volume holds enough water for approximately four standard cups. It is ideal for small households or individuals who brew one or two servings at a time. Larger capacities may waste energy heating excess water. This size fits standard kitchen counters without taking up too much space. You can fill it quickly and boil efficiently for daily morning routines without managing large, cumbersome vessels.
Spout Type: Gooseneck
The curved spout delivers a slow, steady stream of water. This design gives you precise control over pour rate and direction. You can target specific areas of the coffee bed evenly. This accuracy is critical for pour over methods to ensure uniform saturation. It prevents channeling and uneven extraction. The gooseneck shape is a standard requirement for serious manual brewing enthusiasts seeking consistent cup quality.
Design and build details
The OXO Brew kettle is constructed from stainless steel. This material choice provides a durable exterior that resists corrosion. The listing specifies a capacity of 1.1 quarts. This volume is sufficient for multiple cups of pour over coffee in one session. The body measures 10.4 inches in width and 8.2 inches in length. Its height is 7.7 inches. These dimensions suggest it fits comfortably on most kitchen counters without dominating the workspace. The unit weighs 1.13 pounds. This weight is light enough for easy handling during pouring.
The design includes a gooseneck spout. This elongated shape is engineered for controlled pouring. You can direct water flow with precision, which is essential for even extraction in pour over brewing. The handle is designed to stay cool to the touch. This feature allows you to hold the kettle securely while the water is hot. The kettle lifts freely from its base. This cord-free operation makes it easy to maneuver around the kitchen.
According to the listing, the controls are integrated into the body. You can adjust temperature in one-degree increments. The display shows the current heat setting. A built-in timer counts up during the heating process. This layout keeps all necessary information visible without requiring you to look away from the kettle. The finish is a brushed stainless steel appearance. This aesthetic is neutral and suits most kitchen decors.
Setup and everyday use guide
The OXO Brew kettle connects to a standard electrical outlet. You place the stainless steel body onto its base to begin operation. The unit weighs 1.13 pounds and measures 10.4 inches wide by 8.2 inches long. This footprint fits comfortably on most kitchen counters. The design allows the kettle to lift freely from the base. This cord-free feature lets you move the vessel easily around your workspace without managing a dangling cord.
Daily operation centers on precise temperature management. You can set the water heat in one-degree increments between 104 F and 212 F. The display includes a built-in timer that counts up during the heating process. This feature helps you track water preparation time for consistent results. Once the target temperature is reached, the system holds that setting for up to 30 minutes. This keep-warm duration supports extended brewing sessions or multiple pours without reheating.
The gooseneck spout dictates your pouring technique. Its elongated shape and narrow curve deliver a steady, controlled flow. This stream accuracy is essential for even saturation during pour over coffee brewing. The handle remains cool to the touch during operation, providing safe handling. The balanced design ensures stability while pouring. An automatic shut-off mechanism powers down the unit after the keep warm cycle ends. This safety feature prevents overheating when the kettle sits idle. You simply lift the kettle, pour, and return it to the base for the next use.
Before You Buy This Kettle
You will need a pour over dripper to use this kettle effectively. The gooseneck spout is designed for manual control, so it pairs best with flat-bottomed or cone-shaped brewers. Check that your counter space can accommodate its ten-point-four-inch width. You should also ensure your electrical outlets are grounded, as this is an electric appliance. Upkeep is straightforward. Wipe the stainless steel exterior with a damp cloth after use. Descaling is necessary if you have hard water, though the listing does not specify a recommended interval. This unit fits into a pour over setup alongside coffee grinders. It complements manual brewing methods by providing precise temperature stability. If you already own a grinder, this kettle completes the workflow. It does not replace a grinder. You still need to grind beans separately. The thirty-minute keep warm feature helps if you brew slowly. It reduces the need to reheat water between cups. This makes it suitable for small batch brewing sessions.
Check before you buy
- Verify your counter fits the ten-inch width.
- Ensure you have a compatible pour over dripper.
- Check if your water is hard for descaling needs.
- Confirm your outlet is grounded for safety.
The product at a glance
OXO Brew 1.1-Quart Gooseneck Electric Kettle
Best for: precise pour over brewing in small batches
- Capacity
- 1.1 Quarts
- Spout Type
- Gooseneck
- Temperature Control
- 1° increments (104 F to 212 F)
- Keep Warm Duration
- Up to 30 minutes
- Material
- Stainless Steel
- Brew Method
- Pour Over
View on Amazon: OXO Brew 1.1-Quart Gooseneck Electric Kettle Affiliate link
The OXO Brew 1.1-Quart Gooseneck Electric Kettle is a stainless steel water boiler designed for pour over coffee. It heats water in 1-degree increments from 104 F to 212 F and holds the temperature for 30 minutes. The gooseneck spout provides a controlled pour. It weighs 1.13 pounds and includes a built-in timer. This kettle suits those who need precise temperature management for brewing.
Pros
- Heats water in 1-degree increments from 104 F to 212 F
- Gooseneck spout ensures steady flow and accuracy
- Keep warm function lasts up to 30 minutes
- Integrated brew timer aids consistency
- Cord-free lifting for easy maneuvering
Cons
- 1.1-quart capacity limits batch size
- No variable power level settings listed
- Fixed temperature range starts at 104 F
Good fit if
- You brew single cups or small batches of pour over coffee
- You require precise temperature control in 1-degree steps
- You want a kettle with a built-in timer
Skip if
- You need to heat more than 1.1 quarts of water
- You prefer variable power levels for rapid boiling
- You need temperature settings below 104 F
Verdict: OXO Brew 1.1-Quart Gooseneck Kettle fits pour over enthusiasts who need precise 1-degree temperature control and a 30-minute keep warm cycle. Its 1.1-quart capacity is ideal for small batches.
Specifications side by side
| Spec | OXO Brew 1.1-Quart Gooseneck Electric Kettle |
|---|---|
| Capacity | 1.1 Quarts |
| Spout Type | Gooseneck |
| Temperature Control | 1° increments (104 F to 212 F) |
| Keep Warm Duration | Up to 30 minutes |
| Material | Stainless Steel |
| Brew Method | Pour Over |
| Power Source | Electric |
| Size | 1.1 Quarts |
| Features | Timer, Temperature Control |
| Dimensions | 8.2 × 10.4 × 7.7 inches |
| Weight | 1.13 pounds |
| Color | STAINLESS STEEL |
| Model | 8717100 |
Frequently asked questions
Is the OXO Brew kettle suitable for small batch pour over coffee?
Yes, it is designed for small batches. The 1.1-quart capacity allows you to brew multiple cups without excess water waste. This size fits well with standard pour over drippers. It helps you maintain precise temperature control for each brew session. The compact design also saves counter space compared to larger kettles.
What is the temperature range for this electric kettle?
The kettle offers a range from 104 F to 212 F. You can adjust the heat in one-degree increments. This precision lets you match specific coffee bean profiles. Light roasts benefit from higher temperatures, while darker roasts require cooler water. The one-degree resolution ensures consistent results every time you brew.
Does the OXO Brew kettle have a keep warm function?
Yes, it includes a 30-minute keep warm cycle. This feature maintains your selected water temperature after heating. It is useful for brewing multiple cups without reheating. You can set the desired temperature and let the kettle hold it. This ensures consistent heat for your pour over process.
How wide is the OXO Brew kettle?
The kettle measures 10.4 inches in width. This footprint fits comfortably on most kitchen counters. You should check your available space before purchasing. The length is 8.2 inches and the height is 7.7 inches. These dimensions allow it to fit under standard cabinets.
What material is the OXO Brew kettle made of?
It is constructed from stainless steel. This material provides a durable exterior that resists corrosion. The stainless steel body also helps maintain water temperature stability. It is easy to clean and maintain. The finish is specified as stainless steel in the product details.
Does this kettle require a specific type of coffee dripper?
It pairs best with flat-bottomed or cone-shaped brewers. The gooseneck spout allows for manual control of water flow. This precision is ideal for pour over methods. You need a separate dripper to use this kettle. The spout design helps you direct water exactly where you need it.
What is the weight of the OXO Brew kettle?
The kettle weighs 1.13 pounds. This lightweight design makes it easy to handle and pour. You can lift and tilt it with one hand. The base is not included in this weight. The light weight contributes to its ease of use during daily brewing routines.
What is the model number for this OXO kettle?
The model number is 8717100. You can use this number to find replacement parts or verify compatibility. It identifies the specific stainless steel version of the kettle. This number helps you locate the exact product in online listings or support documentation.